[Upgraded Pump] iPriro High Power Houseplants Automatic Watering System for 15 Potted Plants, Automated Watering Device with 30-Day Programmable Indoor Timer and 5V USB Charging Cable

Price: $36.59
(as of Jan 12,2023 19:00:28 UTC – Details)

Product Description


drip irrigationdrip irrigation

No worry of forgetting water your plants anymore. Reliable plants carer when you are outside, travelling or busy with work.Water your plants on time as schedule set, with specific watering time, watering frequency.Easy set- up step and programming.



Watering Device Set Included:

Smart Sprinkler *1 33ft. Water Pipe *1 Drop Arrow *15 Three-way Joint *14 Filter *1 USB Wire *1 User Guide*1

How the watering unit helps for caring your plants?

Automatic watering and easy customization on watering cycle Digital panel and simple three button for easy setting Included all-in-one accessories, easy 4 steps set up Two Types of Power; Supports AA battery/direct USB charge Saving 70% less water than traditional spray Time cycle settings are stored in internal memory automatically Your Plants are never be neglected !

Design your loop

Design your loop

Outlet Pipe

Outlet Pipe

Inlet Pipe

Inlet Pipe

Power Supply

Power Supply

1. Design your loop

We recommend you to draw a design map of your loop, which indicate where the T-connectors will be used. Such a design will help you to determine how to cut the soft pipe and prevent wastes.

(Water bucket need to be placed lower than pump in case siphonage effect which is dirt track back into clean water)

2. Outlet Pipe

Measure the distance between your plant pot to the watering device, and tailor the pipe into that length.Insert dripper to one end of the tube.Install the outlet pipe with dripper to the pump.

3. Inlet Pipe

Measure the distance between the water source and the device, and tailor the pipe into that length.Insert filter to one end of the pipe.Install inlet pipe with its filter to the pump.

4. Power Supply

Insert 4 AA batteries to the power slot

or connect the 5V USB cable to the power port.

Q&A Troubleshoot

1) Why it’s watering weakly or water overdosing? Please check:

1. Avoid Siphon. Water source /water bucket /water surface level should not be placed higher than the pump.2. Because of the high power pump, we suggest set up more than 4 drippers, the more drippers you set up the longer life of the pump.3. If you set up more than 4 drippers, please don’t set up with the cross joint (4-way joint).4. Please check the filter, we suggest clean the filter each week.5. Please adjust inlet pipe should not over than 9.8ft, 3.2~6.5 is the best length.6. The plants should not higher than 6.5ft (vs the water source).7. Please adjust outlet pipe should not over than 33ft.8. Please check the drippers is well connected with the pipe, if not it will to be leaking.9. When finish the set up, you’d better soak the tube in the hot water (which part is connected with the drippers) to make the pipe and the dripper much compact.

2) Why it’s not working? Please check if these were well set:

1. No bending or No clogging inside the tube.2. Please check battery. The pump waters weakly when battery’s electricity volume is low. If you only use AA battery, you’d better choose alkaline battery, we suggest connect to USB power supply for frequent use.3. Timer was set correctly. [First to set watering time, second to set the interval time, third to press the middle button to confirm]4. Refer to our digital PDF manual as below for more. [Please login on your PC to find it]

3) The water flow of the drip emitter:

Because the drip emitter is voltage regulator design, it can provide the relatevely steady flow for your plants when it is correct setting; This way it can make sure each drip emitter is working and easy to control;Because of the high power pump, we suggest to connect more than 4 drip emitters;The reference average flow rate there are: 4 drippers, 60~80ml/min; 6 drippers, 60~70ml/min; 8 drippers, 50~70ml/min; 10 drippers, 40~60ml/min; 12 drippers 30~50ml/min; 15 drippers, 30~40ml/min; For example, when you setting on 4 drippers, the water flow of each drippers is about 60~80ml/min;You can according to the reference average flow rate to increase or decrease drippers for your plants;If you find some drip emitters are abnormal flow, you need to replace the hose or the drippers;

Package Dimensions ‏ : ‎ 8.7 x 6.6 x 3.7 inches; 1.65 Pounds
Date First Available ‏ : ‎ October 14, 2019
Manufacturer ‏ : ‎ iPriro

🌱【Pump Upgrade & Two Power Methods】High-power drip irrigation pump, power upgrade 5 times. Solve water pressure problems, strong water supply. Two type of power supply, 4 AA batteries (NOT Included) and USB cable charging;
🌱【Timing Watering Device】Combine the pump and watering timer in an automatic watering system to pump water from the container, saving 70% water compared to traditional spray and plant irrigation dripper. Help you to take care of plants during the working day, holiday;
🌱【Provide Steady Flow and Deep Irrigation】Because the drip emitter is voltage regulator design, it can provide the relatively steady flow for your plants when it is correct setting; This way it can make sure each drip emitter is working, and you can increase or decrease the count of drip emitters to control the water flow;
🌱【 Program Memory】Once programmed, the settings are stored in internal memory automatically. Custom programming and settings will remain in memory even if power is removed. There will be no need to reprogram the timer every time batteries are changed;
🌱【Travel/Working Good Helper】Solve your daily work, take care of plants when traveling question.Automatic watering device can help you water on time every day, make the plants grow healthier and longer lasting, and make your life easier;
🌱【Package Includes】Device, 33ft Hose, Irrigation Drippers(15 pcs), Three-way joint(14 pcs), Filter(1 pcs), USB wire and Manual book. 【There’s a update digital PDF manual (202204) for downloading and your convenience.】

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: